Solutions

Fire protection systems engineered for specific hazards, applications and applicable design standards.

Automatic Fire Sprinkler Systems

Automatic fire sprinkler systems for commercial, industrial, storage and special-hazard applications, engineered according to hazard classification, building and storage configuration, water supply and applicable design requirements. Solutions include standard coverage, extended coverage, storage, ESFR, dry-type and application-specific sprinklers.

Corrosion Protection Systems

Internal corrosion is the leading cause of premature failure in automatic sprinkler pipework. In dry and pre-action systems, the compressed air that fills the pipe network between activations is roughly 21% oxygen - held against wetted internal pipe walls for years at a time, that oxygen drives steady corrosion that leads to pinhole leaks, blocked sprinklers and costly pipe replacement, often well within the system's expected service life. Wet pipe systems are not immune either: air pockets trapped at high points sit at the air-water interface and corrode the same way. A second mechanism, microbiologically influenced corrosion (MIC), can compound the problem in both system types. Modern thinner-walled sprinkler pipe and more frequent system testing have made corrosion protection a standard part of a well-specified sprinkler installation, not an optional extra. Arcofire supplies Potter's nitrogen generator systems, wet-system inerting kits, purge valves and air maintenance devices that remove the oxygen driving this corrosion at its source.

Fire Detection & Alarm Systems

Fire detection and alarm systems using smoke, heat and flame detection, video-based fire detection and aspirating smoke detection, with system selection based on the protected environment, fire risk and required response.

Fire Hydrant & Hose Systems

External and internal fire water supply systems, including pipework, external hydrants, internal fire hose systems, fire brigade vehicle connections, valves and associated system equipment.

Fire Pump Systems

Fire pump systems for sprinkler, water mist, hydrant and other water-based fire protection systems, including electric and diesel-driven main pumps, standby pumps, jockey pumps, control panels and associated equipment. Systems are selected according to the required flow, pressure, operating configuration and applicable design requirements.

Fire Water Storage Tanks

Fire water storage tanks for sprinkler, water mist, hydrant and other water-based fire protection systems, sized according to the required usable water volume and system demand. Solutions include tank configuration, connections, suction arrangements and integration with fire pump systems.

Foam Fire Suppression Systems

Foam fire suppression systems for flammable liquids and high-risk industrial applications, including foam proportioning, sprinkler and deluge systems, foam discharge devices and firefighting monitors. System configuration and foam concentrate are selected according to the protected hazard, fuel type and application requirements.

Gas Fire Suppression Systems

Gas fire suppression systems protect critical rooms and equipment where water or extinguishing residue could cause unacceptable damage. Arcofire provides engineered systems using FK-5-1-12 clean agent and inert gases, integrating fire detection, control, agent storage, pipework, discharge nozzles and room pressure management.

Special Hazard Fire Suppression

Specialised fire suppression systems for high-risk and critical applications, including CNC machinery, server racks, electrical cabinets, commercial kitchens, vehicles and other equipment requiring dedicated protection.

Water Mist Fire Suppression Systems

Low-pressure water mist systems for a wide range of fire hazards and applications, with system selection based on the protected risk, tested application and approval requirements. Solutions include nozzles, pump units, section valves, controls and associated system equipment.

Fire protection support for your project

Contact Arcofire